Hubsan Zino 2+ User Manual page 32

8. The tilt Angle of the gimbal is too large or the gimbal show abnormal
(1) Restart the aircraft to recalibrate the gimbal
(2) Check on the APP to see whether the gimbal status is normal
9. Gimbal initialize failed
Before starting the aircraft, take off the protective cover of the gimbal
10.The picture is not clear
(1) Check whether the lens protective film is peeled off
(2) Fly in a well-lit environment
(3) Shooting parameters setting in camera Settings of APP
(4) Video source files are saved in TF card files with suffix AA
11. Lens fogging
(1) humid climate causes lens foggy, change aircraft storage location
Place some desiccant in the protective cover of the gimbal when storage
12. Picture or video is lost
(1) Perform completing recording operation after recording video, otherwise it may
lead to video damage or loss
(2) Check whether the TF card is broken
13. constant-height flight by flow cannot be used
(1) The current environment light is weak, please fly on outdoor with sufficient light
(2) detect whether the optical flow lens at the bottom of the aircraft is worn or
covered by foreign matter
26