Radio Control Calibration; Radio Control Stick Setting - Hubsan MINI User Manual

2.6 radio contol calibation
2.6 radio contol calibation
1 - Pull both joysticks to the top left corner and simultaneously press and hold the
power button to turn on the Remote Control, release the power button and the sticks
after hearing the Remote Control emits some beeps.
2 - Rotate both sticks to the maximum angle clockwise at least 3 times, then release
the sticks.
3 - Long press any button (except the powe button) on the transmitter, when the
remote control emits 3 beeps and the display indicates the battery level and the trans-
mission signal level, the calibration has been completed.
4 - Turn off and restart the radio control.
2.7 Setting the adio contol sticks
2.7 Setting the adio contol sticks
Open the menu from the App: Settings - Control - Stick Control Settings. The setting
allows you to change the control mode (Mode 1 - Mode 2). Please remember that the
default setting is MODE 2
16