Transmitter Stick Calibration; X-Hubsan App; App Overview - Hubsan H507A X4 STAR PRO User Manual

2-3 Transmitter stick calibration (Mode 1 and Mode 2 throttle settings)
Joystick mode settings: Enter the H507A interface on the X-Hubsan app. Tap the cog on the upper
right corner of the screen to
enter the Settings interface.
Tap on the "Controller" tab
to set and change joystick
settings/modes.
Transmitter stick calibration: Hold down the Return to Home key or the Auto Takeoff/Auto Land key
while powering on the transmitter. The transmitter will "beep"; pull both joysticks up, down, towards
the center and out. Do this two times; then, roll both sticks in their sockets. Make sure that during both
processes, the sticks are pulled and rotated to their limits. Short press either the Return to Home key or
the Auto Takeoff/Auto Land key to save this setting and exit.
3、X-Hubsan App

3-1 APP Overview

Before flying with the H507A, users must download the X-Hubsan APP. Users
can control flight, camera, video and flight parameters with the APP. It is
recommended to use a large screened smartphones or tablets for the optimal
visual experience.
Please download the X-Hubsan APP for free via the App Store or Google Play.
Parameters Controller
Virtual joystick shows fixedlyo
Joystick Mode
9
MapR elay
on off
mode2 mode1
X - H U B S A N
Others