Versions; Scope Of Delivery; Technical Design - SATA Paint set 10 Operating Instructions Manual

Operating Instructions for SATA FDG
US

5. Versions

Depending on customer requirements, the paint pressure tank may in-
clude various individual component options such as the handle (SATA
paint set 10 only), single / double pressure reducer and the different agi-
tators.
A material outlet is an available option for the bottom of the tank
(SATA FDG 24 / 48 only) as well as a second spray gun connection for the
paint and atomizing air supply.
The individual versions cannot be upgraded.
Handle (SATA paint set 10 only) [1-14]
For comfortable carrying of the paint pressure tank.
Single pressure reducer [1-5] / [2-5]
For paint pressure adjustment.
Double pressure reducer [1-13] / [2-14]
For separate adjustment of the paint and spray pressure.
Manual agitator [1-1] / [2-1]
For manual paint agitation. The agitator is operated using a hand crank.
Pneumatic agitator [1-13] / [1-4] / [2-3] / [2-4]
For uniform agitation of the paint. The agitator is operated by a pneumatic
motor. An external compressed air line supplied it with compressed air.
The pneumatic agitator can be ordered with or without the gear drive as
an option.
Motor-driven agitator [1-2] / [2-2]
For uniform agitation of the paint. The agitator is operated by an electric
motor.
Material outlet at bottom of tank (SATA FDG 24 / 48 only) [2-7]
For connecting the spray gun at the bottom of the tank.
Second spray gun connection [1-6] / [2-7]
For connecting a second spray gun.

6. Scope of Delivery

■ Paint pressure tank, depending on version
■ Wrench for refill opening

7. Technical Design

7.1. SATA paint set 10
Single pressure reducer
528