Preparing For Installation; Fitting The Thermal Insulation, If Appropriate - STIEBEL ELTRON SBP 1000 E Operation And Installation

INSTALLATION

Preparing for installation

9. Preparing for installation
Note
Connect the hydraulic connections with flat gaskets.
9.1

Fitting the thermal insulation, if appropriate

f Position the appliance in its intended site. f
f Fit the thermal insulation according to the instructions sup- f
plied. For this, ensure that there is enough space for the
installation task. You can then link the appliance into the
heating system.
SBP 1000/1500 E (SOL) | SBP 1000-1500 E cool
SBP 1000/1500 E (SOL) | SBP 1000-1500 E cool
17
16
www.stiebel-eltron.com
1
2
3
4
5 6
7
8 9
10
11
14
15
SBP 1010E
17
16
1 Cover
2 Top thermal insulation section (only WDH cool)
3 Top thermal insulation section
4 Top thermal insulation ring
5 Convection brake (only WDH cool)
6 R.h. thermal insulation section
7 Cover strip
8 Flange thermal insulation ring
9 Connection cover (including insulation)
10 Flange cover
11 Thermal insulation, flange
12 Plastic cover with insulation sections
13 Fleece strip
14 Thermal insulation section, bottom
15 Thermal insulation ring, bottom
16 Rose
17 Left thermal insulation section
f On cylinders supplied horizontally, insert the bottom thermal f
insulation section inside the support ring, prior to position-
ing the cylinder. Slightly tip the vertically delivered cylinder
in order to position the bottom thermal insulation section.
f Surround the support ring with the bottom thermal insula- f
tion ring and secure it with adhesive tape.
f Remove the foil from the 5 foam strips (convection brakes) f
and stick them around the cylinder in the positions shown
(only WDH cool).
f Prior to fitting them, shape the right hand and left hand ther- f
mal insulation sections into a semi-circular form for approx.
10 seconds. A pressure-activated adhesive then holds the
thermal insulation sections in the required shape and makes
fitting them easier.
Please note that the use of tensioning straps may damage the
thermal insulation.
SBP 1000-1500 E | E SOL | E cool |
1
3
4
6
7
8 9
10
11
12
13
14
15
19