Step 7 - Installing The Light Bulbs - Hunter Carera Installation And Operation Manual

®

STEP 7 - INSTALLING THE LIGHT BULBS

Your fan may include a light fixture.
If you are not installing a light fixture,
turn to OPERATING YOUR HUNTER
FAN for additional instructions.
WARNING
• To reduce the risk of burns
or other personal injury, do
not attempt to rotate the
spotlights until after the
spotlights have cooled
down.
• To reduce the risk of burns
and eye damage or electri-
cal shock, disconnect power
and allow bulb to cool at
least 5 minutes before re-
placing. Do not touch hot
bulb. Do not look directly
at lighted lamp.
20
For Spotlights:
1. Loosen the locking screws as
shown in Figure 7.
2. Rotate the spotlights to the desired
position and tighten the locking
screws.
3. Install one 230V 60W halogen e27
base light bulb into each of the
spotlights.
Locking
Screw
Figure 7 - Installing Light Bulbs
INSTALLING ACCESSORY LIGHT
KITS
To install the light kit, follow the in-
structions included with the kit for
wiring, mounting, and assembly.
41419-01 10/29/2002