1886
Empty Post
Partially install light kit assembly screws,
found in the
as shown, leaving the circled post empty.
Note:
Fan style may vary.
9
Ceiling Bracket
Downrod
Installing the Light Fixture
3 of 3
Light Kit
bag
Assembly Screw
Light Kit Assembly
Screw
hardware bag, into the posts
Keyhole
Slot
This is the screw you saved that
was attached to the red flag.
1 of 1
Light Kit Screw
Install the saved light kit
screw and tighten all four
screws securely.
Hanging Fan
Wiring
Connect the plugs from the upper
and lower switch housings. Make
sure to line up the colored markings
on the connectors and that the
connectors latch.
Align the three keyhole slots in the light
kit hood with the three assembly screws
in the posts. Lift the light kit assembly
and twist counterclockwise to lock it
into place.
Note:
Fan style may vary.
FAN FALL HAZARD
Make sure screws are tight to secure the
light fixture.
Canopy
Blades
Install a bulb into the
socket. When necessary,
replace with bulbs of
the same wattage.
WARNING
Light
Bulbs/Cage
Remote Cradle