Table of Contents
Advertisement
TROUBLESHOOTING
PROBLEM
Nothing happens; fan does not move.
Noisy operation.
41419-01
10/29/2002
PROBABLE CAUSE
1. Power turned off, fuse blown, or
circuit breaker tripped.
2. Loose wire connections or wrong
connections.
3. Pull cord switch not "on".
4. Reversing Switch partially engaged
1. Blade assembly screws and / or
blade mounting screws loose.
2. Blade cracked.
3. Using non-approved speed control.
SOLUTION
1. Turn power on, replace fuse, or
reset breaker.
2 . Loosen canopy, check all con-
nections according to STEP 4 -
WIRING THE FAN (turn power
off before checking).
3. Pull the pull cord switch.
4. Disconnect power to the fan and
slide Reversing Switch fully to one
side or the other.
1. Tighten screws until snug.
2. Replace all blades.
3. Change to approved speed con-
trol.
®
continued
23
Advertisement
Table of Contents
