Table of Contents
Advertisement
®
STEP 6 - ASSEMBLING FAN BLADES
Hunter fans use several styles of fan
blade irons (brackets that hold the
blade to the fan).
1. Your fan may include blade grom-
mets. If your fan has grommets,
insert them by hand into the holes
as shown in Figure 6a.
2. Attach each blade to blade iron
using three blade assembly screws
as shown in Figure 6b. Some fans
feature a decorative medallion as
Grommet
Fan
Blade
Figure 6a - Inserting Grommet into
Fan Blade
18
well as a blade iron. Insert the
assembly screws into the blade
iron, through the blade and into
the medallion, with the blade
sandwiched between the blade
iron and medallion as shown in
Figure 6c.
Figure 6b - Attaching Fan Blade to
Blade Iron
If you used grommets, the blades
may appear slightly loose after
screws are tightened. This is
normal.
3. Remove the blade mounting
screws and rubber shipping
bumpers from the motor.
Blade
Iron
Medallion
Figure 6c - Attaching Fan Blade to
Blade Iron using Decorative Medal-
lion
41419-01
10/29/2002
Advertisement
Table of Contents
