Using The Weight Bar; Adding Weight; Adjusting The Backrest - iFIT WEIDER PRO 8500 User Manual

USING THE WEIGHT BAR

To use the Weight Bar (17), fi rst place the desired
amount of weight (not included) onto the ends of the
Weight Bar (see ADDING WEIGHT below). Then,
disengage the Locking Bar (18) by rotating it off the
Uprights (3).
When fi nished with the exercise, reengage the
Locking Bar (18) by rotating it onto the Uprights (3).

ADDING WEIGHT

Slide the desired amount of weight (not included)
onto the Weight Carriage (41), the Weight Bar (17),
the Leg Lever (110), or your barbell (not included).
Secure the weights with the Spring Collars (91).
Store unused weight on the storage tubes (A) on the
Supports (6, 7).
WARNING:
more than 150 lbs. (68 kg) on the Weight
Carriage (41). Do not place more than 310
lbs. (141 kg) on the Weight Bar (17), or on
the Barbell Rests (not shown), including
the barbell. Always place the same amount
of weight on both sides of the Weight
Carriage, Weight Bar, or barbell.

ADJUSTING THE BACKREST

Hold the Backrest (117) with one hand and dis-
engage the Bench Knob (124) from the Backrest
Bracket (111). Move the Backrest to the desired
position and reengage the Bench Knob.
Do not place
17
3
7
91
110
124
34
18
3
41
6
17
91
117
111
91
A