iFIT WEIDER PRO 8500 User Manual page 13

10. Orient the a Spotter Carriage (24) as shown.
Slide the Spotter Carriage (24) and two Carriage
Bumpers (27) onto the left Weight Bar Guide (5).
Then, engage the Spotter Carriage onto the Left
Upright (3).
Repeat this step with the other Spotter
Carriage (not shown) and the right Weight
Bar Guide (not shown).
11. Slide a Carriage (19) onto each Weight Bar
Guide (5).
Insert the Weight Bar (17) through the left
Carriage (19), the Locking Bar (18), and the
right Carriage. Engage the Locking Bar onto the
Uprights (3).
12. Attach a Weight Bar Adapter (22) to one end of
the Weight Bar (17) with an M10 x 30mm Screw
(95), an M10 Split Washer (93), and an M10
Large Washer (76). Repeat this step on the
other end of the Weight Bar.
Tighten an M8 x 15mm Screw (21) into the left
Carriage (19). Repeat this step with the right
Carriage (not shown).
10
3
11
5
19
3
18
12
19
21
13
27
24
27
5
5
3
19
17
22
76
93
17
95