iFIT WEIDER PRO 8500 User Manual page 22

36. Route the High Cable (54) over a 90mm Pulley
(58). Attach the 90mm Pulley and a Plastic Cable
Trap (63) to the left Side Top Frame (13) with
an M10 x 50mm Bolt (104) and an M10 Locknut
(79). Make sure that the Plastic Cable Trap is
oriented to hold the High Cable in the groove
of the 90mm Pulley.
37. Route the High Cable (54) under a 90mm Pulley
(58). Attach the 90mm Pulley to the left Base
(1) with an M10 x 43mm Bolt (96) and an M10
Locknut (79).
38. Route the High Cable (54) around a 115mm
Pulley (59). Attach the 115mm Pulley, a Long
Metal Cable Trap (62), and an M10 Washer (84)
to the Center Base (2) with an M10 x 75mm Bolt
(102) and an M10 Locknut (79). Make sure that
the Long Metal Cable Trap is oriented to hold
the High Cable in the groove of the 115mm
Pulley.
36
13
79
37
79
1
38
59
22
54
63
58
104
54
58
96
102
84
54
2
62
79