iFIT WEIDER PRO 8500 User Manual page 26

47. Attach an Arm Pad (30) to the Right Arm (11)
with two M6 x 70mm Screws (87) and two M6
Washers (86). Attach the other Arm Pad (30)
to the Left Arm (10) in the same way.
48. Insert the Left Barbell Rest (35) and the Left
Barbell Spotter (36) into the Left Upright (3).
Insert the Right Barbell Rest (4) and the Right
Barbell Spotter (20) into the right Upright (3).
Make sure that both Barbell Rests (4, 35) and
both Barbell Spotters (20, 36) are set at the
same height.
49. Slide a Weight Bumper (37) onto each storage
tube on the Left Support (6). Make sure that the
flat edge of each Weight Bumper is facing
away from the Left Support.
Slide a Weight Bumper (37) onto each stor-
age tube the Right Support (not shown).
47
11
86
87
48
4
3
20
49
26
10
30
30
35
3
36
37
6
37