iFIT WEIDER PRO 8500 User Manual page 23

39. Route the High Cable (54) under a 90mm Pulley
(58). Attach the 90mm Pulley to the Center Base
(2) with an M10 x 43mm Bolt (96) and an M10
Locknut (79).
40. Route the High Cable (54) over a 90mm Pulley
(58). Attach the 90mm Pulley and a Plastic Cable
Trap (63) to the lower holes of the Long Double
U-bracket (47) with an M10 x 50mm Bolt (104)
and an M10 Locknut (79). Make sure that the
Cable Trap is oriented to hold the High Cable
in the groove of the Pulley.
41. Route the High Cable (54) under a 90mm Pulley
(58). Attach the 90mm Pulley to the Center Base
(2) with an M10 x 43mm Bolt (96) and an M10
Locknut (79).
39
96
54
40
104
58
41
54
96
23
58
79
2
47
79
63
54
58
2
79