iFIT WEIDER PRO 8500 User Manual page 27

50. Attach two Stabilizer Feet (50) to the Bench
Stabilizer (108) with four M4 x 19mm
Screws (82).
51. Attach the Bench Stabilizer (108) to the Bench
Frame (107) with two M8 x 70mm Carriage Bolts
(143) and two M8 Locknuts (78). Do not tighten
the Locknuts yet.
52. Attach the Leg Bumper (135) to the Front Leg
(109) with an M4 x 19mm Screw (82).
Attach the Front Leg (109) to the Bench Frame
(107) with two M10 x 65mm Bolts (105), two
M10 Washers (84), and two M10 Locknuts (79).
Make sure that the Locknuts are inside the
indicated hexagonal holes.
See step 51. Tighten the M8 Locknuts (78).
53. Apply grease to an M10 x 75mm Hex Bolt (106).
Attach the Leg Lever (110) to the Front Leg (109)
with the M10 x 75mm Hex Bolt (106) and an M10
Locknut (79). Do not overtighten the Locknut;
the Leg Lever must pivot easily.
50
50
82
51
52
109
135
82
53
79
110
27
108
50
82
78
107
108
143
105
84
107
Hexagonal
79
Holes
109
Grease
106