Stage 2: Cable Installation; Lcd Monitor Cabling - SMART Podium ID422w Installation And User Manual

9 | CH A P T E R 2 – I NS T A L L I N G T H E S M A R T IN T ERA CT IV E PE N DIS PLA Y
7. For DVI operation, connect the SMART Podium ID422w DVI to DVI video cable
between the DVI IN connector located on the pen display unit and the DVI-D or
DVI-I connector on your video card.
For VGA operation, connect the SMART Podium ID422w analog RGB video cable
between the DVI IN connector located on the pen display unit and the VGA
connector on your video card.
NOTE
If you are connecting the unit to an Apple ADC or mini-VGA connection, you
must obtain an appropriate adapter. Adapters are available at retail outlets.
For ADC operation, connect one end of the SMART Podium ID422w DVI to DVI
video cable into the ADC to DVI adapter, connect the other end of the SMART
Podium ID422w cable to the DVI IN connector on the pen display unit, and then
connect the ADC adapter end to the ADC connector on your video card.
For an Apple mini-VGA connector, plug the VGA end of the SMART Podium
ID422w analog RGB cable into the mini-VGA port adapter. Then connect the DVI
end of the SMART Podium ID422w cable to the DVI IN connector on the pen
display unit, and then connect the mini-VGA port end to the mini-VGA port on your
video card.
8. Connect the power adapter to the SMART Podium ID422w, connect the adapter's
power cable, and then connect the adapter to an AC outlet.
9. Turn on the SMART Podium ID422w.
The power LED will light orange.

Stage 2: Cable Installation

CAUTION
• Use only the cables provided with your interactive pen display. Other cables
can damage the interactive pen display.
• Don't connect the video or power cables if the interactive pen display or your
computer is on. Doing so can damage the interactive pen display or your
computer.

LCD Monitor Cabling

IMPORTANT
• Make sure your video card has a VGA or DVI connector, and that you
correctly set the DVI/VGA switch for the video connector you are using.
• Do not attach the USB data cable until instructed to do so.
99-00724-00 REV C0