Black Box mm146 User Manual page 52

Setting the Default Preset
Viewing Video Presets
50
If you have more than one camera, choose which of these presets is the Default
Preset.The Default Preset is the view that is displayed at the beginning of each call.
To set the Default Preset:
menu button, then press the number 3 key to display the Camera
Press the
1.
Video Setup menu.
Press the number 2 key to highlight Default Preset.
2.
Use the Right or Left arrow keys and select number between 1 and 9 to set the
3.
Default Preset.
enter button twice to save your changes and return to the Setup
Press the
4.
menu.
To view near end presets when not in a call:
Press the menu button, then press the number 3 key to display the Camera
1.
Video Setup menu.
Press the number 1 key to display Preview window.
2.
Press the Arrow Center button on the key pad.
3.
At the bottom right of the screen you see: "1-9 view".
Choose a number between 1 and 9 to view that preset.
4.
To view another preset repeat steps 3 and 4.
5.
When you have finished viewing presets, the
6.
to the Setup Menu.
To view camera presets during a call:
Press the source button once for Far End control or twice for Near End
1.
control.
Press the round arrow center button.
2.
Press a number key between 1 and 9 depending on the video preset you wish
3.
to view.
enter button twice to return