Switching Between Video Sources - Black Box mm146 User Manual

If the camera is connected to Data Port 1:
Press the number 1, or the arrow Up key to highlight the Data Port 1 option.
1.
Use the Right or Left arrow keys to select EXT CAM1.
2.
Press the
3.
Press the number 2, and select Protocol which has become visible, and select
4.
the appropriate driver.
Press the
5.
Note: Handshaking and Priority fields do not need to be changed. The default settings,
NONE and LOW, are correct for this configuration.
To connect other cameras:
• Refer to the manufacturer's documentation or contact Black Box for advice.

Switching Between Video Sources

If you have additional video sources connected to your videophone, the far end can
switch between these video sources and select the video they want to view during the call.
To switch between video sources during a call:
Press the
1.
control.
Press a number key, 1, 2 or 3 depending on the video source you wish to view.
2.
Note: 1 is the Internal Camera, 2 is the phono connector (Video In) and the MINIDIN 8
camera port is your number 3 video source. Contact Black Box for more information.
Setting Camera Video Presets
Up to 9 camera presets can be configured in the videophone. This enables you to
select various camera positions from any of the three video sources. For instance, if
the unit is used for videoconferencing, a PTZ camera may be set as the default.
A preset configuration is a combination of a specific camera and its settings. Video
presets are set in the Camera Video Setup menu. See Setting Video Presets on the
next page.
enter button once.
enter button twice to save changes.
source button once for far end control or twice for near end
Connecting Other Equipment
47