Black Box mm146 User Manual page 32

Making a Call Using Manual Dialing
30
To make a manual dialed call:
From the idle screen or Setup Menu, press the
1.
Manual Dial screen is displayed.
Select the required call type and banwidth using the left & right arrow keys in
2.
the Type field. If you wish to call a standard telephone or mobile, select
Analog.
In the Addr field, use the number keys on the key pad to enter the IP address
3.
you want to call. Use the * key (located at the bottom left of the key pad) or
enter a space using the Right arrow key to represent a period in the IP address.
Alternatively, instead of entering the IP address, you can enter the name in the
4.
Name field, providing Gatekeeper is enabled. You must enter this name
exactly as it is stored in the system, such as "JOHNDOE". Adjust the case by
pressing and holding the keys if necessary.
If the person you are calling requires PIN authorization, in the PIN field use
5.
the remote control to enter the PIN.
Press the
6.
The message "Dialling x.x.x.x, User Found, Connecting" is displayed.
To end the call, replace the handset.
7.
start button to dial your call.
start button twice. The