Black Box mm146 User Manual page 17

letters. The name you enter also appears in your Speed Dial directory.(NOTE:
If you are using the name as an H.323 alias in conjunction with a gatekeeper,
avoid using spaces in the name.)
• Press a number key to cycle through the letters until your choice is displayed.
• Press and hold the key if you wish to change between upper and lower case
characters.
• Press the Right arrow key to move one space to the right to enter the next letter.
• Press the Left arrow key to delete the previous character.
Highlight Type and select the connect speed of the videophone.
4.
Select either IP 32K, IP 48K, IP 64K, IP 96K, IP 128K, IP 160K, IP 192K,
IP 256K, IP 320K, IP 384K, Analog (mm156 only) or PING. For
Asymmetrical mode, (first number represents maximum receive speed, second
number represents maximum transmit speed) select either
IP 48/32K, IP 64/32K, IP 96/32K, IP 128/32K, IP 160/32K.
Choose PING to test the network path to another device.
Highlight the Addr field and enter the IP address or telephone number of the
5.
party you are calling using the number keys. Use the * key (located at the
bottom left of the number pad), or enter a space using the Right arrow key to
represent a period (.) in the IP address. If you enter a number greater than 255
you are notified that an invalid IP address has been entered. The Addr field
stays highlighted until a valid IP address is entered.
Press the
6.
To enter another number in the Phone Book, press the Right arrow key and
7.
follow steps 3 to 5, above.
Press the
8.
the Phone Book and exit.
Entering a PIN for a Contact
Using a PIN is optional. However, you must enter the PIN if the person you are
calling has this security feature enabled. For information about setting up a PIN, see
"Changing the User Options" on page 45.
enter button once to save the entry.
enter button twice, to save the information you have entered in
Setting up the videophone
15