Black Box mm146 User Manual page 18

Setting the Phone Book Mode
Press the enter button twice to save the changes
Updating Slave Units with Master Phone Book
16
There are two possible modes for the videophone.
• Master
• Slave
The videophone is supplied in Slave mode by default. If you have multiple units
within a LAN, you need to configure 1 unit in your network to be a Master unit. The
Master unit can then be configured with entries in the Phone Book. See "Setting up
the Phone Book" on page 14.
The Slave units within the same network can then be updated with Phone Book
entries contained in the Master unit. In this way, multiple Slave units on your LAN
can easily be updated with the Phone Book from a single Master unit.
To set the Mode of your videophone to Master:
Press the menu button, then press the number 1 key to display the Phone
1.
Book options.
Press the number 2 key to highlight the Mode field.
2.
Use the Right or Left arrow keys to select Master.
3.
To update a Slave unit with the Master Phone Book entries: