Connecting The Power Supply - Black Box mm146 User Manual

Connecting the Power Supply

8
To connect the network cable:
Connect one end of the network cable into the socket labeled Network at the
1.
rear of the videophone,
Connect the other end into your RJ-45 network jack.
2.
To connect the PC (optional):
Connect one end of the PC cable into the network port of the PC,
1.
Connect the other end into the port labeled Uplink/PC. The specification for
2.
this cable is a standard, straight-pinned Cat 5.
12 VDC, 3A
To connect the power supply:
Connect the power supply adapter to the circular power jack labeled
1.
12 VDC, 3A on the back of your videophone (see page 36).
Connect the other end of the power supply adapter to your wall outlet.
2.
The status light on the front of your videophone turns from flashing green to
solid green when the videophone is ready to make a call. A few seconds later
the introductory screen displays on the LCD screen
Video In Video Out
Audio In Audio Out
Port 2
Port 3
Network UpLink/PC