Black Box mm146 User Manual page 50

Setting Video Presets
48
You can also set presets for remote cameras if you have a supervisor PIN for the
remote videophone that the camera(s) are connected to. In a similar manner, users of a
remote unit can set and/or amend the video presets of your local videophone,
provided you set up a Supervisor PIN and let them have the number. Setting a
Supervisor PIN is covered in Chapter 7 - Advanced Options.
To set your local video presets:
menu button, then press the number 3 key to display the Camera
Press the
1.
Video Setup menu.
Press the number 1 key - Preview/Set Preset. After a pause, the screen displays
2.
showing your image taken by the internal camera.
To program the Preset:
Press a number key between 1 and 3 to select the camera source to use for your
1.
preset. The text at the top right of the screen displays the selected video source
for a few seconds. (A = Input Source 1 from the built-in camera,
B = Input Source 2 from Video In, C = Input Source 3 from the Camera port
MINIDIN connector).
Use the Zoom In and
2.
and zoom that camera to the view you want to save.
Zoom Out buttons and the arrow keys to pan, tilt