Black Box mm146 User Manual page 20

18
Use the number keys, or press the Up or Down arrow keys to select an option
2.
in the list.
Analog Setup
(PSTN)
Network Setup
H323 Setup
Auto Dialer
Intercom Dial
Intercom Answer
Select Analog Setup to configure the modem, dial prefix, and
autoanswer.
Select this option to access the Network Setup menu to
configure the IP addresses and UDP Port address relevant to
your network.
Only enable H323 if a Gatekeeper is present on the network.
The Auto Dialer feature is for setting the first entry in the
speed dial to be dialed automatically when an external alarm
connected to the mm146 is activated. Note that the default
setting is OFF.
Use the Right or Left arrow keys to select ON or OFF.
Select ON to activate Auto Dialer.
Select OFF to turn the auto dialer off.
The Intercom feature allows you to dial the last part of the IP
address of other IP videophoness within your network.
Set the Intercom Dial feature to 2 Digits, 3 Digits or 4 Digits,
depending on the IP addresses used within your network,
using the Right or Left arrow keys on your key pad. The
intercom feature is suitabl only for IP video calls, and is not
appropriate for analog calls.
The Intercom Answer feature allows you to receive calls
automatically or manually when an Intercom number is
dialed.
Use the Right or Left arrow keys to select AUTO or
MANUAL.
Select AUTO to enable a video call to start automatically
when you receive an intercom call.
Select MANUAL to allow a video call to start only when the
start button is pressed or the handset is picked up.