Part 1: Installation Instructions; Preparing For Installation - Micromeritics SediGraph III 5120 Installation Instructions And Checklist

Preparing for Installation

Preparing for Installation
Before you begin installation of the SediGraph III 5120, perform these steps:
• Thoroughly review the Preinstallation Checklist, which has been returned from the cus-
tomer.
The Preinstallation Checklist and Instructions have been written to ensure that the
customer site is ready for this installation. In addition, the customer has been notified that
the installation will proceed smoothly if all of the items on the checklist are completed
properly.
• The Preinstallation Checklist helps you perform the steps described in the Installation
Instructions. If there are ANY discrepancies on the Preinstallation Checklist, contact the
customer and explain how the installation will be affected.
For a successful installation, you will need the following:
Item
Installation
Instructions
Installation Checklist
Standard Service
Tool Kit, safety
glasses, and
protective gloves
2

Part 1: Installation Instructions

Purpose
To provide step-by-step instructions
for each procedure.
Make sure you follow the procedures
in the order in which they are
presented to ensure a successful
installation.
If the user has not purchased an
option, for example, a MasterTech,
skip the instructions for that
component and proceed to the next
step.
To list the procedures required for the
installation process and verify
completion of each procedure.
To provide the tools required for a
proper, safe installation.
SediGraph III 5120 Installation
Location
In this document.
In this document.
Provided by the Service
Representative.
Mar 2010