Micromeritics SediGraph III 5120 Installation Instructions And Checklist page 18

Installing the 5120 Analysis Program
13. Click Next.
14. Choose one of the following:
• If you have only one analyzer attached to the computer, the source location will be the
setup CD currently in the CD-ROM drive, which is the default location. Press
proceed to step 16.
• If you have two analyzers attached to the computer, the application checks the current
setup CD for the calibration files for the analyzer whose serial number you entered for
Unit #1 in the previous dialog.
a. If the files are found, the source location will be the setup CD currently in the CD-
ROM drive, which is the default location. Press
b. If the files are not found, the message shown below is added to the Calibration File
Installation dialog.
14
The Calibration File Installation dialog is displayed.
SediGraph III 5120 Installation
and proceed to step 15.
Next
Next and
Mar 2010