Cleaning; Electricity; Section 8 - Disposal Management Concept - NUVE NF48 User Manual

If the centrifuged samples are corrosive, only rinsing with water is not
sufficient. The residuals dissolve in the water and humidity on the rotor
and in the buckets.
Some particles may stick to the tubes, buckets and adapters. These
particles crash and do harm to anodized surface during centrifugation
and ease the occurrence of corrosion.
7.4

CLEANING


Disconnect the centrifuge before cleaning.

There is no need of daily cleaning unless a tube breakage occurs or any liquid spills.
7.5

ELECTRICITY

Centrifuged at high voltages are present behind the panels. These panels are electrically
disconnecting Do not open the centrifuge.
SECTION 8 – DISPOSAL MANAGEMENT CONCEPT
The currently valid local regulations governing disposal must be observed. It is in the
responsibility of the user to arrange proper disposal of the individual components.
Applicable local regulations for disposal have to be carefully observed.
The instruments and electronic accessories (without batteries, power packs etc.) must be
disposed off according to the regulations for the disposal of electronic components.
Batteries, power packs and similar power source have to be dismounted from
electric/electronic parts and disposed off in accordance with applicable local regulations.
14