Cleaning The Exhaust Port, Muffler And Spark Arrestor; Vacuum Bag - Yardworks 060-2385-8 Manual

30
model no.
060-2385-8

CLEANING THE EXHAUST PORT, MUFFLER AND SPARK ARRESTOR

(IF APPLICABLE)
The spark arrestor must be cleaned or replaced every 50 hours or yearly to ensure
–
proper performance of your product. Spark arrestors may be in different locations
depending on the model purchased. Please contact your nearest service dealer for the
location of the spark arrestor for your model.
Inspect periodically the muffler for loose fasteners, any damage or corrosion or
–
blockage caused by insect nests. If any sign of exhaust leakage is found, stop using the
machine and have it repaired immediately.

VACUUM BAG

A dirty bag will reduce performance. To clean the bag, turn it inside out and shake.
–
Wash the bag in soapy water at least once a year.
NOTICE: With use and/or operating conditions, the exhaust port,

muffler, and/or spark arrestor screen (if applicable) may become blocked
with carbon deposits. If you notice a power loss with your product, you
may need to remove these deposits to restore performance. We highly
recommend that only qualified service technicians perform this service.
| contact us: 1.866.523.5218