Yardworks 060-2385-8 Manual page 21

model no.
060-2385-8
Filling the Tank
1. Place the blower/vacuum on a flat stable surface, with the fuel tank cap facing
upwards.
2. Clean the surface around the fuel cap to prevent contamination.
3. Loosen the fuel cap slowly by turning counter-clockwise.
4. Pour the fuel mixture carefully into the tank.
5. Only fill the fuel tank to 80% of the full capacity.
6. Clean and inspect the fuel cap gasket before replacing the fuel cap.
7. Replace the fuel cap and tighten it by turning it clockwise.
8. Wipe spilled fuel from the product.
9. If you spill fuel on the unit, wait 10 minutes after wiping before starting.
10. Move at least 30' (9 m) away from refueling area before starting the product.
NOTICE: It is normal for smoke to be emitted from a new engine

during first use.
 WARNING: Always shut off engine before fueling. Never add fuel to
a machine with a running or hot engine. Wait at least 15 minutes to allow
for cool down before refueling. Move at least 30' (9 m) from refueling site
before starting engine. Do not smoke and stay away from open flames and
sparks. Failure to safely handle fuel could result in serious personal injury.
NOTICE: Fuel system damage or performance problems resulting

from the use of an oxygenated fuel blend containing more than the
percentages of oxygenates previously stated are not covered under
warranty.
| contact us: 1.866.523.5218
21