Advertisement
Advertisement
Table of Contents
Related Manuals for Yardworks AERO FORCE 060-3775-4
Summary of Contents for Yardworks AERO FORCE 060-3775-4
- Page 1 LEAF BLOWER/VAC WITH AERO FORCE™ TECHNOLOGY model no. 060-3775-4 | contact us: 1.866.523.5218 3084514 Conforms to UL STD 1017 Certified to CSA STD. C22.2 No. 243 IMPORTANT: Instruction Read and follow all safety rules and operating Manual instructions before using this product.
- Page 2 model no. | contact us: 1.866.523.5218 model no. | contact us: 1.866.523.5218 060-3775-4 060-3775-4 READ THESE INSTRUCTIONS BEFORE USING THIS BLOWER / VACUUM Specifications Important safety instructions WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY: Specific safety rules •...
- Page 3 model no. | contact us: 1.866.523.5218 model no. | contact us: 1.866.523.5218 060-3775-4 060-3775-4 • Do not force tool. Use the correct tool for your application. The correct tool will do • Make sure your extension cord is in good condition. When using an extension cord, the job better and safer at the rate for which it is designed.
- Page 4 model no. | contact us: 1.866.523.5218 model no. | contact us: 1.866.523.5218 060-3775-4 060-3775-4 Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product effectively and safely.
-
Page 5: Double Insulation
model no. | contact us: 1.866.523.5218 model no. | contact us: 1.866.523.5218 060-3775-4 060-3775-4 DOUBLE INSULATION Minimum Gauge for Extension Cords (AWG) (when using 120 V only) Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three-wire grounded power cord. -
Page 6: Packing List
model no. | contact us: 1.866.523.5218 model no. | contact us: 1.866.523.5218 060-3775-4 060-3775-4 ASSEMBLING THE AERO FORCE™ AMPLIFYING TUBE UNPACKING This product requires assembly. • Connect AERO FORCE™ amplifying tube to AERO FORCE™ amplifying tube • Carefully remove the product and any accessories from the box. Make sure that all connector by screws. - Page 7 model no. | contact us: 1.866.523.5218 model no. | contact us: 1.866.523.5218 060-3775-4 060-3775-4 • With gate open, align tabs on vacuum tube with opening inside gate. (Fig. 3) • Add collection bag by simply aligning the plastic connector sleeve on the bag to the blower exhaust.
-
Page 8: Starting / Stopping The Blower
model no. | contact us: 1.866.523.5218 model no. | contact us: 1.866.523.5218 060-3775-4 060-3775-4 APPLICATIONS • To start the blower, place the power switch on I (Low Speed) or II (High Speed) position. You may use this product for the purposes listed below: •... -
Page 9: General Maintenance
model no. | contact us: 1.866.523.5218 model no. | contact us: 1.866.523.5218 060-3775-4 060-3775-4 GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. - Page 10 model no. | contact us: 1.866.523.5218 model no. | contact us: 1.866.523.5218 060-3775-4 060-3775-4 Problem Possible cause Solution 1.10 1.11 1.12 1. Bag full 1. Empty the bag. 2. Blocked tube 2. Clear the blockage. 3. Blocked impeller 3. Clear the blockage. Unit will not blow 4.
-
Page 11: Two-Year Limited Warranty
Description QTY. 131017127 Power Head Assembly For TWO YEARS from the date of purchase within Canada, YARDWORKS CANADA will, at its option, repair or replace for the original purchaser, free of charge, any part or 131017101 Left Motor Housing parts found to be defective in material or workmanship. - Page 12 Made in China. Imported by Yardworks Canada. Toronto, Canada M4S 2B8...