Page 1
BRUSHLESS AERO FORCE TECHNOLOGY BLOWER model number 060-1985-6 | contact us: 1.866.523.5218 3026035 IMPORTANT: Instruction Read and follow all safety rules and operating Manual instructions before using this product.
Congratulations on your purchase of your new Yardworks tool. It has been designed, engineered ® and manufactured to give you the best possible dependability and performance. Should you experience any problem you cannot easily remedy, please contact our Yardworks ® customer service line at 1.866.523.5218.
060-1985-6 | contact us: 1.866.523.5218 FOR ALL APPLIANCES safety guard. Check the alignment of the moving parts, the binding of the moving • Avoid dangerous environments — do not parts. Check for broken or defective use appliances in damp or wet locations.
Page 6
060-1985-6 | contact us: 1.866.523.5218 be ejected from the battery; avoid ADDITIONAL SAFETY WARNINGS contact. If contact accidentally occurs, IMPORTANT SAFETY INSTRUCTIONS flush with water. If liquid contacts eyes, When using an electrical appliance, basic additionally seek medical help. Liquid...
Page 7
060-1985-6 | contact us: 1.866.523.5218 SAFETY WARNINGS FOR BATTERY k) Always purchase the battery PACK pack recommended by the device manufacturer for the equipment. a) Do not dismantle, open or shred cells Keep battery pack clean and dry.
Page 8
060-1985-6 | contact us: 1.866.523.5218 model no. 060-1985-6 | contact us: 1.866.523.5218 Information for radiated emission This device complies with Canadian ICES- 001. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two...
Page 9
060-1985-6 | contact us: 1.866.523.5218 Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product effectively and safely.
060-1985-6 | contact us: 1.866.523.5218 Turbo button On/off switch with variable speed control Handle Battery pack (060-1988-0) Motor housing Tube release button Aero Force tube Battery pack release button Charger (060-1990-2) We recommend that you purchase your accessories from the same store that sold you the tool.
060-1985-6 | contact us: 1.866.523.5218 NOTE: Before using the tool, read the instruction book carefully ASSEMBLY 1. ASSEMBLING AND REMOVING THE BLOWER TUBE (SEE FIG. A1) - ASSEMBLING Before assembling the blower tube, be sure the on/off switch is in “O’’ Off position.
060-1985-6 | contact us: 1.866.523.5218 OPERATION BEFORE PUTTING INTO OPERATION 1. CHARGING THE BATTERY (SEE FIG. B) a. The battery in your new tool is not charged when it leaves the plant. Therefore it must be fully charged before using the first time.
Page 14
060-1985-6 | contact us: 1.866.523.5218 CHARGING INDICATOR This charger is designed to detect some problems that can arise with battery packs. Indicator lights indicate problems (see table below). Light ON/ Flash Status Defective battery. Red on Battery Temperature Protection.
Page 15
060-1985-6 | contact us: 1.866.523.5218 3. STARTING AND STOPPING (SEE FIG. D) - STARTING Move the on/off switch forward to the “I” position. - STOPPING Move the on/off switch backward to the “O” position. - VARIABLE SPEED CONTROL The on/off switch with variable speed (2) controls the airflow.
Page 16
060-1985-6 | contact us: 1.866.523.5218 4. USING THE BLOWER (SEE FIG. E1, E2) The blower is intended for residential use only. Use the blower outdoors to move debris from hard surfaces. Adjust the airflow by adjusting the on/off switch to suit different working conditions.
Page 17
060-1985-6 | contact us: 1.866.523.5218 5. TURBO BUTTON FOR POWER BOOSTING (SEE FIG. F) The turbo button can increase airflow significantly, and it can be used for clearing heavy or wet debris. To use the turbo button, first switch on the blower, push the on/off switch forward to select any speed control, then depress the turbo button and hold it.
060-1985-6 | contact us: 1.866.523.5218 Remove the battery pack before carrying out any adjustment, servicing or maintenance. There are no user-serviceable parts in your blower. Keep the motor ventilation slots clean. Keep all working controls free of dust.
060-1985-6 | contact us: 1.866.523.5218 The following table gives checks and actions that you can perform if your machine does not operate correctly. If these do not identify/remedy the problem, contact Yardworks at 1.866.523.5218. ® Symptom Possible Causes...
060-1985-6 | contact us: 1.866.523.5218 Item Description QTY. Item Description QTY. Left Decorative Cover Support Leg Left Housing Front Cover Right Housing LED Panel Right Decorative Cover Screw Button Set PCBA Compression Spring Screw Cover Rear Cover Button Set...
060-1985-6 | contact us: 1.866.523.5218 model no. 060-1985-6 | contact us: 1.866.523.5218 FIVE-YEAR LIMITED WARRANTY HOW TO OBTAIN SERVICE Warranty service is available by calling For five (5) years from the date of purchase the toll-free helpline at 1.866.523.5218.
Page 23
060-1985-6 | contact us: 1.866.523.5218 FCC Part 15 Supplier’s Declaration of Conformity Product Description: 48V 2.0A Charger Model Number: 060-1990-2 Trade Name: YARDWORKS ® This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:...
Page 25
BRUSHLESS AERO FORCE TECHNOLOGY BLOWER Item # 060-1985-6 | contact us: 1.866.523.5218 ASSEMBLY ASSEMBLING AND REMOVING THE BLOWER TUBE OPERATION 1. CHARGING THE BATTERY (SEE FIG. B) 2. REMOVING AND INSTALLING THE BATTERY PACK (SEE FIG. C1, C2) * This information is provided for your convenience. It does not replace the instruction manual and safety instructions.
Page 26
BRUSHLESS AERO FORCE TECHNOLOGY BLOWER Item # 060-1985-6 | contact us: 1.866.523.5218 3. STARTING AND STOPPING (SEE FIG. D) 4. USING THE BLOWER (SEE FIG. E1, E2) 5. TURBO BUTTON (SEE FIG. F) To use turbo button, first switch on the blower and select a speed, then depress the turbo button and hold it.