Yardworks 060-2385-8 Manual page 23

model no.
060-2385-8
To Start A Warm Or Hot Engine:
1. Set the choke knob (C) to the RUN position.
2. Slowly press the primer bulb (D) 4-6 times.
3. Pull the starter grip (A) until the engine runs.
4. When the engine has started, press and release the throttle trigger (E).
To Stop The Engine:
To stop the engine, depress and hold the STOP switch (F) to the stop position.
NOTICE: If the engine does not start, return to the CHOKE position

and repeat the steps that follow. Allow the engine to run for 15 seconds,
then set the choke lever to the RUN position.
IF ASSISTANCE IS REQUIRED STARTING THIS PRODUCT:
Do not return this product to the store where it was purchased.
| contact us: 1.866.523.5218
Please call us for any issues you may have.
Contact us: 1.866.523.5218
23