Page 1
12 AMP ELECTRIC BLOWER/MULCHER 267-2929 Owner’s Manual TOLL-FREE HELPLINE: 1-888-266-7096 Read all safety rules and instructions carefully before operating this tool.
IMPORTAnT SAfETY InSTRUCTIOnS READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. READ THESE INSTRUCTIONS BEFORE USING THE BLOWER • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
IMPORTAnT SAfETY InSTRUCTIOnS • Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. • Keep firm footing and balance. Do not overreach. Overreaching can result in loss of balance.
SPECIfIC SAfETY RULES fOR BLOWER • Extension Cord – To reduce the risk of disconnection of appliance cord from the extension cord during operating, it is possible to tie the extension cord and power cord in a knot to prevent them from becoming disconnected during use. Make the knot as shown in figure 1, then connect the plug end of the power cord into the receptacle end of the extension cord.
Page 6
SPECIfIC SAfETY RULES fOR BLOWER • Save these instructions. Refer to them frequently and use them to instruct others who may use this power tool. If you loan someone this power tool, loan them these instructions also. WHILE OPERATING UNIT AS A BLOWER •...
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-pretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes Current Hertz frequency (cycles per second)
Page 8
To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator’s manual. If you do not understand the warnings and instructions in the operator’s manual, do not use this product. Call YARDWORKS customer service for assistance.
ELECTRICAL W A R N I N G THIS BLOWER/VAC IS fOR OUTDOOR USE OnLY. DO nOT EXPOSE TO RAIn OR USE In DAMP LOCATIOnS. GUIDELINES FOR USING EXTENSION CORDS USE THE PROPER EXTEnSIOn CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one of heavy enough gauge to carry the current your product will draw.
ELECTRICAL W A R N I N G CHECK EXTEnSIOn CORDS BEfORE EACH USE. If DAMAGED REPLACE IMMEDIATELY. nEVER USE TOOL WITH A DAMAGED CORD SInCE TOUCHInG THE DAMAGED AREA COULD CAUSE ELECTRICAL SHOCK RESULTInG In SERIOUS InJURY. ELECTRICAL CONNECTION This tool is powered by a precision built electric motor.
KnOW YOUR BLOWER The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. (See Fig. 2) BLOWER TUBE The blower tube can be easily installed on the blower without any additional tools.
ASSEMBLY UNPACKING • This product requires assembly. W A R N I N G This new product has been shipped in a partially assembled condition as described below. Carefully check the packing list below to ensure all items are included in the package; the packing list describes all loose items that are not assembled to the product as shipped.
Page 13
ASSEMBLY ASSEMBLE AS A MULCHER (See Fig. 3) 1. Slide the front and rear mulcher tubes together until the lock button engages. (See fig 2) 2. Pull the lock button forward to disengage the gate. Hold the gate open. (See fig 3.1) 3.
ASSEMBLY ASSEMBLE AS A BLOWER ((See Fig. 4)) 1. Slide blower tube forward until the notched areas on the blower housing click into the slots on the tube. 2. Insert the concentrator nozzle onto the regular nozzle to lock. (Concentrator nozzle is used to increase air flow in tight areas: flowerbeds.
OPERATIOn CONNECTING THE POWER CORD Fig. 6 (See Fig.6) 1. Secure the extension cord to the motor housing using the notch at rear of blower. This prevents accidental removal of the electrical cord. 2. Plug the female end of the electrical cord into the receptacle at the back of the unit.
Page 16
OPERATIOn OPERATING TIPS (See Fig.8) • The bag is installed and zipped closed (when used as a mulcher). • Be sure the bag is zipped closed before operating the unit. • Assure the unit is not directed at anybody or any loose debris before starting the unit. •...
OPERATIOn AIR VENTS never cover air vents. Keep them free from obstructions and debris. They must always remain clear for proper motor cooling. W A R N I N G To avoid serious personal injury, do not wear loose fitting clothing or articles such as scarves, strings, chains, ties, etc., that could get drawn into the air vents.
MAInTEnAnCE SERVICING DOUBLE-INSULATED UNITS This unit is double insulated. In a double-insulated unit, two systems of insulation are provided instead of grounding. There is no grounding provided and no means of grounding should be added to this unit. Extreme care and knowledge of the system is required when servicing a double-insulated unit.
TROUBLESHOOTInG PROBLEM POSSIBLE CAUSE SOLUTION Unit will not blow 1. Bag full 1. Empty the bag. or mulcher. 2. Blocked tube 2. Clear the blockage. 3. Blocked impeller 3. Clear the blockage 4. Dirty bag 4. Clean the bag. 5. Torn bag 5.
YARDWORKS™, at its own discretion will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer. This warranty is valid only for...