Appendix Ii: Abs (Albatron Bios Security) Card Setup - Albatron PX915P-2V User Manual

Appendix II: ABS (Albatron BIOS
Security) Card Setup
Introduction
The ABS (Albatron BIOS Security) system provides your system with a recovery BIOS backup
when your onboard BIOS has been damaged beyond system boot capability.
Preparation and Setup
You should prepare a boot floppy disk and have it ready in case of such BIOS failures.
Otherwise you will have to find another computer to make the boot floppy disk from.
When you make the disk, you should visit our website and download the latest version of
the BIOS file for your mainboard along with the AWDFLASH.exe executable, placing both
onto the floppy disk.
Onoboard BIOS Recovery Procedures
1. Make sure your system is turned off.
2. Set the jumper cap on the ABS_JP1 header located on the ABS Card to the
position (See Figure 1).
3. Remove the jumper caps (on pins 1-2, pins 3-4) from the mainboard ABS header (See
Figure 2).
4. Insert the ABS Card onto the ABS header on the mainboard. The ABS Card will fit over the
entire the header and can only be inserted in one direction.
Mainboard PX915P-2V
("Closed" means putting a jumper cap
onto two adjacent header pins.)
Figure 1
圖一
ABS
43
"Rescue BIOS"