Appendix I: Super 5.1 Channel Audio Effect Setup - Albatron PX915P-2V User Manual

Appendix I: Super 5.1 Channel Audio
Effect Setup
Channels Setup
1. After starting your system, click the Sound Effect Manager icon
on the desktop. You can also find the icon by going to Start-> Setting -> Control Panel.
2. Click the Speaker Configuration button. One of the screens will display as shown below.
3. You can choose a 2, 4 or 6 channel (speaker) system.
2 Channels
Super 5.1 Channel Audio Effect
This mainboard comes with an ALC655 Codec which supports high quality 5.1 Channel
audio effects. With ALC655, you are able to use standard line-jacks for surround audio
output without connecting to any auxiliary external modules. To use this function, you
have to install the audio driver in the bonus Pack CD as well as an audio application
supporting 5.1 Channel audio effects. See the audio Port Connectors in the Hardware
Installation section for a description of the output connectors.
Speaker Test
Make sure the cable is firmly into the connector.
1. Click the audio icon
2. Click Speaker Test button, you can see the screen like the pictures below.
3. Select the speaker which you want to test by clicking on it.
2 Channels
4 Channels
from the Windows screen.
4 Channels
42
Mainboard PX915P-2V
from the tool bar
6 Channels
6 Channels
Subwoofer
Front Right
Front Left
Rear Left
Center
Rear Right