Albatron PX915P-2V User Manual page 20

TOS-Link connectors will be provided on the bracket and which are convenient you to
output or input audio format files between your system and the SPDIF styled devices.
Pin
1 +5V
3 SPDIF out
5 SPDIF in
Front Audio Header: FRONT AUDIO
If your case front panel has audio ports, you can connect them to the Front Audio Header
of this mainboard. First, you must remove the jumper caps on this header and then
attach the cables from the front panel to the pins on this header. You can use both the
front audio panel and back panel audio simultaneously. If you are not using front panel
audio ports, leave the jumper caps on the header pins (Note: pins 5-6 and 9-10) to avoid
problems with the back panel audio ports.
Pin Assignment
1 Mic in/center
3 Mic_VREF
5 Front out_R
7 N/C
9 Front out_L
SPDIF
Assignment
FRONT AUDIO
16
Mainboard PX915P-2V
Pin Assignment
2 Key
4 Ground
Pin Assignment
2 Ground
4 Audio power +5V
6 Rear out_R
8 Key
10 Rear out_L