Table of Contents
Advertisement
Onboard Device
USB Controller
This option should be enabled if your system has a USB port installed on the system board.
You will need to disable this feature if you add a higher performance controller.
Options: Enabled (Default), Disabled
USB 2.0 Controller
This option should be enabled if your system has a USB 2.0 device installed on the system
board. You will need to disable this feature if you install a USB 1.1 device.
Options: Enabled (Default), Disabled
USB Keyboard Support
Enables support for USB attached keyboards. Options: Disabled (Default), Enabled
Audio Device
This option allows you to control the onboard audio. Options: Auto (Default), Disabled
10/100 Mb LAN Device
This option allows you to choose whether enable the 10/100 Mb LAN on the mainboard or
not. Option s: Disabled, Enabled (Default)
Onboard I/O Chip Setup
Power On Function
This option allows you to select a way to power on your computer.
Options: Password,Hot KEY,Mouse Left,Mouse Right,Any KEY,BUTTON ONLY (Default), and
Keyboard 98
KB Power-On Password
This option is as a part of power-on sequences with your system. This option is
configurable only when "Power-On Function" is set with "Password".
Hot Key Power ON
This option allows you to use the Ctrl key along with a hot key (function key) to power on
your system. This option is configurable only when "Power-On Function" is set to "Hot Key".
Options: Ctrl-F1 (Default),Ctrl-F2...... Ctrl-F12
Onboard FDC Controller
Select "Enabled" if your system has a floppy disk controller (FDC) installed on the system
board and you wish to use it. If you install an add-in FDC or the system has no floppy drive,
select "Disabled". Options: Enabled (Default), Disabled
Mainboard PX915P-2V
29
Advertisement
Table of Contents
