Table of Contents
Advertisement
13
Routine Maintenance
1. Have your Electro Freeze Distributor
check the refrigeration system and make the
necessary adjustments.
2. Both air and water cooled freezers
have an air condenser. The condenser fins
need to be cleaned by your Electro Freeze
Distributor to remove all forms of dirt, lint,
and dust.
Never use a screwdriver or sharp
object to clean between fins.
SEMIANNUALLY
1. Contact your Electro Freeze distributor to
replace drive belts.
2.
On air cooled and air cooled remote freez-
ers have your Electro Freeze distributor check
the condenser fan motor oil.
2. Have the gear reducer oil changed by your
Electro Freeze distributor.
NOTE: Under normal conditions, after the
initial change, the oil should be changed
after every 2500 hours of operation or
every six months, whichever occurs first.
184584
ELECTRO FREEZE Soft Serve Models SLX400, SLX400E, SLX500
QUARTERLY
Important:
(continued)
ANNUALLY
CAUTION
To avoid electrical shock or
contact with moving parts,
make sure the control pad is
"OFF" and that the main power
switch is "OFF".
1. Contact your Electro Freeze Dis-
tributor to have your gear reducer oil
changed.
NOTE: Under normal conditions, after the
initial change, the oil should be changed
after every 5000 hours of operation or every
year, whichever occurs first.
2. Contact your Electro Freeze Dis-
tributor for service to replace drive belts and
lubricate the fan motors as needed.
3. Contact your Electro Freeze Dis-
tributor to clean the inside of the freezer,
including base, side panels, condenser, etc.
4. Contact your Electro Freeze Dis-
tributor to check water-cooled condenser and
flush clean to remove scale and deposits if
necessary.
37
Hide quick links:
Advertisement
Table of Contents
