Uncrating And Inspection - ELECTRO FREEZE SLX400 Operator's Manual With Replacement Parts List

ELECTRO FREEZE Soft Serve Models SLX400, SLX400E, SLX500
2.1

Uncrating and Inspection

When the unit is received and while the
carrier is still present, inspect the ship-
ping carton for any damage that may
have occurred in transit. If the
SHOCKWATCH
and/or the carton is broken, torn, or
Figure 2-1 Machine bolted to Shipping Base
Figure 2-2 Installing Mounting Legs or Casters
2
CAUTION
Be sure to properly
support the machine when
removing bolts and
installing legs or casters.
® label indicates red
punctured, note the damage on the
carrier's freight bill and notify the
carrier's local agent immediately.
1. Remove the carton from the
pallet, and move the machine as close
as possible to the permanent location.
2. Remove the shipping bolts on
the bottom of the freezer (figure 2-1)
and install either the legs or casters
(figure 2-2).
NOTE: Screw casters
or legs all the way in
coupling, then adjust
to level side to side
with a 1/4" slope to
the front.
184584