10.1
Sanitizing
covers.
Place the power switch in the "ON" position.
Do not use the
water or sanitizer in the cylinder. The
freezer will be damaged.
sanitizing solution, press the
"BEATER ON" for both sides of the freezer
and allow the beaters to run for 5 minutes.
During this time period, check for leaks
around the head, plungers and drain tubes.
sides. Place an empty container under the
dispensing head and drain the sanitizing
solution by opening the plungers to allow
cylinders and hoppers to empty. Open and
close each plunger at least 10 times during
draining to sanitize the port area of dispense
head.
drained from the freezer, press the
"OFF" button.
184584
ELECTRO FREEZE Soft Serve Models SLX400, SLX400E, SLX500
(continued)
5. Sanitize the inside of the hopper
6. Reconnect main power supply.
Important:
freeze position with
7. When the cylinders have filled with
8. Press "BEATER OFF" on both
9. When the sanitizing solution has
and
29