Disassembly And Cleaning; Cleaning Accessories - ELECTRO FREEZE SLX400 Operator's Manual With Replacement Parts List

ELECTRO FREEZE Soft Serve Models SLX400, SLX400E, SLX500
8

Disassembly and Cleaning

It is important that the freezer be disas-
sembled, washed, lubricated and sanitized
before operation.
8.1

Cleaning Accessories

The following accessories shipped with the freezer are necessary for cleaning,
sanitizing and disassembly/assembly.
Figure 8-1
20
CAUTION
To avoid electrical shock or
contact with moving parts,
make sure the control pad is
"OFF" and that the power
switch is "OFF".
1 HC150009 BRUSH.
HC158012 HANDLE.
4-inch diameter with 36-inch
handle, used for cleaning the
cylinder.
2 HC158077 BRUSH.
9/16 inch with 36 inch handle, used
for cleaning the drain tube.
3 HC158003 BRUSH.
Double end, 1-1/8 inch diameter and
7/16 inch diameter, used for clean-
ing the mix inlet tube, mix feed
tube, head and general cleaning.
3 HC158003 BRUSH-7/16 & 1-1/8" DOUBLE END
4
Accessories
The cleaning and sanitizing instructions
explained in this manual are required to
maintain a clean, sanitary freezer. The
freezer should be disassembled, cleaned,
reassembled, lubricated and sanitized daily
to ensure the best possible product quality
and freezer operation.
Persons assembling, cleaning, or sanitizing
the freezer must wash and sanitize hands
and forearms with an approved sanitizer.
4
5
6
HC158009 BRUSH-4" DIA W/O HANDLE
1
HC158012 HANDLE-BRUSH FIBERGLASS
2 HC158077 BRUSH-9/16 DIA X 36" HANDLE
5
HC169374
TOOL-O RING REMOVAL
HC169374 TOOL - O-RING
REMOVAL.
Aids in removing O-rings from
plungers, dispense head, and mix
feed tube.
HC158000A LUBRICANT -
PETROL GEL
Approved lubricant for moving
parts and O-rings. See assembly
instructions for lubricating points.
HC115536 KIT - O-RING.
(NOT SHOWN)
This kit contains all O-rings and
seal needing replacement on a
regular basis.
HC158000A
LUBRICANT-PETROL GEL 4 OZ TUBE
184584