Table of Contents
Advertisement
Section 4
Unpacking, inspecting and storing
4.2.4
4.3
20
Returning an IED damaged in transit
If damage has occurred during transport, appropriate actions must be taken against the
latest carrier. Please inform the nearest ABB office or representative. Notify ABB
immediately if there are any discrepancies in relation to the delivery documents.
Storing
Storing of the IED before installation must be done in the original transport packaging
in a dry and dust free place. Storage temperature must be within the range of -40° C
to +70° C. The average high temperature is recommended to be less than +40° C, to
minimize component ageing.
1MRK514019-UEN A
670 series 2.0 IEC
Installation manual
Advertisement
Table of Contents
