Mounting The Injection Unit Rex060 (Reg670 Only); Mounting The Coupling Capacitor Unit Rex061 And Shunt Resistor Unit Rex062 (Reg670 Only); Coupling Capacitor Unit Rex061 - ABB Relion 670 2.0 IEC Series Installation Manual

Section 5
Mounting
5.3.6
5.3.7
5.3.7.1
32

Mounting the injection unit REX060 (REG670 only)

The injection unit REX060 case size is 6U, 1/2 x 19". REX060 can be rack, wall or
flush mounted in the same way as the IED. For guidance, see instructions for rack
mounting, wall mounting or flush mounting the IED in this manual.
REX060 shall be mounted close to the IED. It is recommended that they are mounted
in the same cubicle.
Mounting the coupling capacitor unit REX061 and shunt
resistor unit REX062 (REG670 only)

Coupling capacitor unit REX061

IEC11000019 V1 EN
Figure 10: Coupling capacitor unit REX061
1MRK514019-UEN A
X1
IEC11000019-2-en.vsd
X2
670 series 2.0 IEC
Installation manual