Section 5
Mounting
5.3.7.2
34
Shunt resistor unit REX062
IEC11000038 V1 EN
Figure 12:
Shunt resistor unit REX062
217 [8,54]
84 [3,3]
Ø 5,5 [0,22]
IEC11000039 V2 EN
Figure 13:
REX062 measures and drilling plan
REX062 shall be mounted close to the IED. It is recommended that REX060 and
REX062 are mounted in the same cubicle as the IED.
The surface of REX061 unit may be temporarily very hot due to heat
dissipation, up to about 65° C above the ambient temperature. It must
X1
84 [3,3]
1MRK514019-UEN A
IEC11000038-1-en.vsd
155 [6,1]
2 [0,079]
IEC11000039-2-en.vsd
670 series 2.0 IEC
Installation manual