Document Revision History; Related Documents - ABB Relion 670 2.0 IEC Series Installation Manual

Protection and control

Table of Contents

1MRK514019-UEN A

1.3.2

1.3.3

670 series 2.0 IEC

Installation manual

assistance during the testing phase. The manual provides procedures for checking of

external circuitry and energizing the IED, parameter setting and configuration as well

as verifying settings by secondary injection. The manual describes the process of

testing an IED in a substation which is not in service. The chapters are organized in

chronological order in which the IED should be commissioned.

The operation manual contains instructions on how to operate the IED once it has been

commissioned. The manual provides instructions for monitoring, controlling and

setting the IED. The manual also describes how to identify disturbances and how to

view calculated and measured power grid data to determine the cause of a fault.

The service manual contains instructions on how to service and maintain the IED. The

manual also provides procedures for de-energizing, de-commissioning and disposal

of the IED.

The technical manual contains application and functionality descriptions and lists

function blocks, logic diagrams, input and output signals, setting parameters and

technical data sorted per function. The manual can be used as a technical reference

during the engineering phase, installation and commissioning phase, and during

normal service.

The communication protocol manual describes a communication protocol supported

by the IED. The manual concentrates on vendor-specific implementations.

The point list manual describes the outlook and properties of the data points specific

to the IED. The manual should be used in conjunction with the corresponding

communication protocol manual.

Document revision history

Document revision/date

-/May2014

A/June 2016