Transportation And Storage; Repacking Instructions; Transportation And Storage Environment - inbody BSM170 User Manual

III. Transportation and Storage
A. Repacking Instructions
1. Prepare the BSM170/170B packaging box.
2. Place the paper pad on the bottom and put 2 small polyethylene pads on both sides of the packaging box,
as illustrated below.
Polyethylene pads
3. Position the disassembled components as illustrated below.
* Accessory box: measurement tape 1EA, footplate mounting screws 4EA, Stand mounting screws 4EA, AA batteries 4EA
Stand (lower)
Footplate
Stand (upper)
4. Place 1 big polyethylene pad over the footplate.
5. Close the packaging box and seal it with tape.
B. Transportation and Storage Environment
The BSM170/170B should be transported or stored under the following conditions.
Temperatures range
Relative humidity
Atmospheric pressure
22
User's manual
Test jig
-10 ~ 70℃
10 ~ 80% RH (No Condensation)
50 ~ 106kPa
Accessory box
Measurement unit