Measurement Instructions - inbody BSM170 User Manual

B. Measurement Instructions
1. Move the measurement unit so that a number is displayed on the screen.
2. Step on the footplate barefeet and lower the measurement unit so that the upper part of the measurement
unit touches the examinee's head. The height measurement is shown on the LCD screen, as illustrated below.
* If the measurement value hold feature has been enabled in Setup, pressing the
displayed on the LCD, locks the measurement for the set hold time.
* Only BSM170B can connect to the InBody via its integrated Bluetooth. Please refer to the InBody User's manual about
Bluetooth connection guide. If the BSM170B is connected to an InBody, pressing the
message on the LCD screen, as illustrated below, and transmits the measured value to the InBody.
<When not connected to InBody>
20
button after desired measurement is
button shows the 'send'
<When connected to InBody>