Stadiometer Settings - inbody BSM170 User Manual

D. Stadiometer Settings
1. Requried Settings
1. After turning on the BSM170/170B, press and hold the
for at least 3 seconds to enter the Setup menu.
2. In the Setup menu, set the measurement value hold time, beep, screen brightness, units, and offset value.
1) Measurement value hold time: When the
the value displayed will stay locked on the LCD screen for this amount of time, even if the measurement
unit is moved.
a. Use the
b. Use the
* Button mode: You can lock and unlock the measurement value by pressing
* Time mode: The measured height will display on screen for a set time. Set the lock time between 1 and 10 seconds.
c. Save changes by pressing the
12
button to move to 'Hold' and then press the
button to set a hold time for the locked height value.
Button mode
button.
button and the
button is pressed after a height measurement is recorded,
button to select.
Time mode
button simultaneously
button.