Table of Contents
Advertisement
Description of decal on manner of controlling arm
Joystick's motion to the left
lowers the second
extension arm.
Joystick's backwards
motion lifts the first arm
up.
Joystick's button 1 pushed with
joystick's forward motion extends
telescopic arm (for Camel 900 E
and KWT 650 E only). This
function enables also moving the
second arm forward (applies to
KWT 651 E).
Joystick's motion to the left
with joystick's button 1 pushed
rotates head to the left (head's
floating function is the turned
off) .
IV.
Control panel with proportional control
Proportional control of extension arm is possible using the same control panel as for electrical
control (Fig. 45) and joystick (Fig. 47). Controlling is presented in Fig. 48.
Operator's manual
Joystick's forward motion
lowers the first arm.
Pushing joystick's button 1 with
joystick's backwards motion shortens
telescopic arm (for Camel 900 E and
KWT 650 E).
This function enables also moving
the second arm backwards (applies to
KWT 651 E).
Fig. 47. Proportional control joystick
- 42 -
Arm
Flail head
Joystick's motion to the
right lifts the second
extension arm up.
Pushing joystick's button 1 with
joystick's motion to the right rotates
head to the right ((head's floating
function is the turned off).
Pushing joystick's button 2 and
joystick's forward motion sets
extension arm in working
position.
Pushing joystick's button 2 and
joystick's backwards motion sets
extension arm in transport
position.
Advertisement
Table of Contents
