Standard Equipment And Spare Parts; Flails Applied In Mowing Heads - SaMASZ KWT 550 Operator's Manual

3.4.

Standard equipment and spare parts

Machine are sold with the following standard equipment:
warranty card,
operator's manual with spare part list,
control panel,
extra cutting knives – 2 pcs,
PTO shaft,
warning plate with combined lights and reflectors,
warning triangle,
plate C-10 Drive at the left of the sign,
spray paint (150 ml).
Tab. 5. Recommended PTO shaft for mounting the machine to a tractor
Arm type Power
HP
KWT
CAMEL 35 660-900
KOLIBER
Shaft end without clutch –
Connect from tractor's side
CAUTION:
PTO shaft lubrication frequency must be respected. Points shown on Fig. 23
shall be lubricated every 50 hours.
PTO shaft shall also be lubricated prior to and after period of longer idleness.
PTO shafts of other brands with equivalent technical parameters may be used on the SaMASZ
permission.

3.4.1. Flails applied in mowing heads

In order to ensure proper operation of mowing head, if excessively worn flails should be replaced.
Relevant reference for flail could be found in mower parts catalogue.
The table below shows knives that can be mounted in SaMASZ mowers.
Flail knives
KNIFE TYPE I
Application: grass,
shrub, stalks, remnants
after trimming, stubbles
Operator's manual
Length Moment
mm Nm
460 7G3N066CE007007MA
50h
Fig. 23. PTO shaft lubrication. Mounting directions
Symbol Clutch
50h
50h
LAMA
‒
- 20 -
Arm
Flail head
Manufacturer Remarks
Bondioli &
Pavesi
Shaft end without clutch –
Connect from mower's side
KW
Standard